Second-hand Heavy Duty Bench

Overall Dimensions: 1050mm H x 1060mm D x 2410mm L
Shelf Dimensions: 1829mm L x 840mm D
Heavy-duty bench fitted with a 33mm melamine bench top and one adjustable lower shelf (76.2mm pitch) with 18mm raw particleboard.

$350 + GST ($385 inc. GST)

*CLEARANCE* Assorted Second-hand Beams

Please note that second–hand components are available on a first come, first served basis, and we cannot guarantee further availability once our existing stock is sold.
All quantities are rough estimates, confirmation may be required upon order placement.

Pallet Racking

Trade-in pallet racking is often available.

Please call us to discuss your requirements.

Pick Bins

• No catch points for dirt or dust – easily wiped clean.
• Ideal for hospitals & laboratories or for warehouses and spare parts.
• Large flat label area for printed adhesive labels.
• Small items are easily drawn out from the smooth front radius.
• Handle incorporated into face.
• Store on shelf or louvre panels.

Pick Bin Specifications

Divider for AP35 bin only

Selective Pallet Racking

Selective pallet racking is the most common type of pallet racking. As all pallet locations are directly accessible, it is the ideal pallet racking system to use for general purpose pallet storage where pallet access, flexibility and picking speeds are important.

Pallet racking beam heights are easily adjustable – selective pallet racking can be reconfigured to store different pallet heights as required.

Selective pallet racking can be used with all types of forklift. Standard counter-balance forklifts and reach trucks are the most common.

To request a free selective pallet racking quote in Adelaide, please contact us today.

Standard Dimensions

Double-Deep Pallet Racking

Double-deep pallet racking allows goods to be stacked two pallets deep. A specialized “double-deep” forklift is required to access the rear pallets. Double deep pallet racking reduces the number of forklift aisles required – hence increasing the pallet storage capacity.

In each pallet location, the front pallet must be removed in order to access the rear pallet location. This is not ideal where all pallets must be visible and accessible, but it can be an effective storage system where multiple pallets of the same product are stored.

At any time, at least 50% of the pallets stored are accessible. Double-deep pallet racking is a good compromise between selective pallet racking and high density pallet storage systems such as drive-in pallet racking.

At heights of over 4m, guide rails are typically fitted to assist with locating and positioning pallets within the double-deep rack.

To request a free quote on double deep pallet racking in Adelaide, please get in touch to discuss your requirements.

Drive-In Pallet Racking

Drive-in pallet racking is a high density pallet storage solution best suited to applications where there are a large number of homogenous pallets to be stored.

Pallets are stored in lanes on a LIFO (last in, first out) basis. Rear pallets cannot be accessed without unloading all the pallets in front of them.

Drive-in racking is typically designed and specified to order.

Please contact us to discuss your pallet racking requirements and we can provide you with a specification to suit.

Custom Racking

Pallet racking can be adapted for other non-pallet storage solutions.

These include:

• Furniture racks and deep racks for bulky goods
• Carpet racks
• Tyre racks
• Cable racks
• A-frame racks for long products
• Carton live storage (CLS) racks

Please contact us to discuss your requirements or to obtain a free custom pallet racking quote in Adelaide, get in touch.

Rack Protection

It makes sense to protect your pallet racking. Forklift impact damage can cause racking to fail or product to fall. This could cause injury to employees, damage your racking or stock, and cause serious downtime to your business.

At a minimum, corner uprights must be protected at the end of each row or when exposed to a cross aisle or gangway intersection.

Intermediate uprights can also be protected where there is a high risk of damage – for example, in fast moving environments with high pallet turn over.

We provide a full range of protection options for your pallet racking, including:

• Steel “end-of-row” protectors
• Steel column guards
• Plastic column protectors (ideal for intermediate uprights)
• Plastic rear column pallet deflectors

Mesh Backing (Monkey Mesh)

Mesh backing can be fitted to your pallet racking to reduce the risk of stock falling into pedestrian areas.

MonkeyMESH™ is a modular mesh backing system that can be fitted to new or existing pallet racking installations.

Being a modular design, it is quick and easy to install.

Rack Based Shelving Accessories

We have a range of shelving accessories available to suit pallet racking.

These can be used to make hand loaded storage levels in a pallet racking installation or to make free standing heavy duty shelving bays.

Ask about our range of rack accessories, including:

• Mesh Decks (Suit: 838mm & 1219mmD)
• Particleboard Shelves (Suit: 838mmD)
• Front to Back Particleboard Supports (Suit: 609mm, 838mm & 1219mmD)
• Fork Entry Bars (Suit: 838mm & 1219mmD)
• Row Spacers (Suit: 430mm)
• Levelling Plates (1.5mm)
• Beam Safety Clips
• Front Mount Cable Rack Connectors
• Galvanised Mesh Cages (Stackable & Rackable)
• Vertical Divider Arms (600mmL — Suits: 80×40 & 100x50mm Beams)
• Hose Hangers (700mmL — Suits: 100×50 & 120x50mm Beams)

Cantilever Racks

Cantilever racking is the ideal racking system for storing of long products.

Ideal for storage of long items such as: timber, steel, board and pipes.

Racks are engineered and supplied with Safe Working Loads.

Cantilever racks can be powder-coated for indoor use, or supplied in hot-dip galvanized (HDG) finish for outdoor applications.

Racks can be configured as single-sided or double-sided.

Cantilever arms are height adjustable.

We can design and specify cantilever racks to meet your requirements.

Light Duty Cantilever Rack

• Arm capacity between 250kg to 450kg UDL per arm – depending on configuration.
• Shorter heights ideal for small hand load/unload situations.
• Indoor and outdoor applications

Medium Duty Cantilever Rack

• Arm capacity between 1,000kg to 1,300kg UDL per arm – depending on configuration.
• Indoor and outdoor applications

G-Span Long Span Shelving

G-Span long span shelving is ideal for general storage applications including: warehouses, workshops, archive storage, shipping containers, etc. If you need garage shelving and/or shelving for your shed, then the G-span system is also the perfect solution.

60mm box section beams with an 18mm step allow beams to be easily and neatly fitted with 18mm particleboard, steel infill panels or wire mesh decks.

Uprights come pre-assembled for easy installation and have a charcoal grey powder coat finish.

Beams are height adjustable on 50mm increments.

Castor wheel base plates are available for light duty mobile shelving and packing benches.

Standard dimensions

Bay length is “clear entry”. Each upright adds 70mm to overall length.

Rivet Long Span Shelving

Rivet shelving is a boltless shelving system – strong, economical and easy to assemble.

Bright silver zinc finish – corrosion resistant.

Rivet shelving can be used with particleboard shelves for general storage. Step beams allow a flush fit for 18mm board.

When paired with mesh decks, rivet shelving is an economical shelving system for use in cool rooms or for food storage.

A base level shelf must be fitted for strength and stability.

Adjustable feet are available for levelling on uneven surfaces.

To enquire about a free quote on Rivet Shelving in Adelaide, please Contact Us Today.

Standard Dimensions (Wire Mesh and Particleboard Shelving)

Archive Storage Solutions

Rivet long span shelving and Maxispan long span shelving are ideal for archive box storage.

The table below is based on standard archive box dimensions:

• 260mm H x 320mm W x 400mm D

Some archive boxes have different dimensions, so please check the dimensions of your boxes.

Our shelving storage capacities assume boxes are stored two high on each lower shelf, and one high on the top shelf. This takes into account a standard 2.4m ceiling height.

Typical archive boxes can weight up to 15kg. Please consider your OHS requirements in determining where the top shelf level can be set.

Archive Shelving Units

Alternatively, use G-Span Shelving:

2,400mm H x 460mm D

RUT (Rolled Upright Type) Shelving

Known as RUT shelving due to the rolled edge that provides strength to the uprights. Also commonly referred to as BROWNBUILT shelving – Brownbuilt is a common brand for this style of shelving.

RUT shelving is often used for:

• Office filing (level arch files etc.)
• Medical records / manila folder records
• Small part storage
• Storage with parts trays or pick bins
• General storage

All components, including shelves, are steel.

A solid back panel is generally installed so that each bay is enclosed on three sides. Cross-braced open backs are an economical option if a solid back is not required.

RUT shelving can be configured as single-sided or back-to-back shelving.

Shelves are adjustable on 25mm increments – RUT shelving is a good option where many shelf levels are required with tight spacing.

Standard Dimensions

Display Shelving

Gondola style retail display shelving – ideal for retail shelving applications and product display. Retail display shelving is typically used in: hardware stores, chemists, supermarkets and convenience stores.

Double sided shelving bays are generally used in open floor space to create browsing aisles. Single sided shelving bays are used along walls or the end of double sided runs.

Our standard G-Series display shelving is fitted with steel perforated backs which can be used with pegboard hooks for “hang sell” displays.

Adjustable steel shelves and wire baskets are available. Wire shelf fronts and dividers can also be fitted.

A range of pegboard hooks and accessories are available.

For the best range of display shelving Adelaide has to offer, contact us today. We offer competitive Prices and prompt, professional service.

Standard Dimensions

Cool Room Shelving

Rivet shelving fitted with wire mesh decks is a strong and economical choice for cool room storage. See above RIVET SHELVING.

Where specialized cool room shelving is required, we can supply a range of sizes, types and finishes to suit, including the full range of Australian made MANTOVA™ shelving.

Please contact us for details.

Louvre Panels

• Hanging storage panel for Pick Bins AP01 to AP35.
• Fix to wall or shadow board for easy access to your Pick Bins.
• Fix to end of shelving bay or racking run.

Steel Louvre Panels

Hooks For Louvre Panels

Mobile Louvre Stand

Mobile trolley with double sided louvre panels for Pick Bins.

Overall dimensions: 1585mm high x 1050mm long x 600mm deep.

Base shelf depth: 270mm per side.

Louvre panel area: 1350mm high x 900mm wide per side.

Fitted with 2 x fixed castors and 2 x braked swivel castors.

Price:  $570 + GST each.  

Units sold assembled.

Ideal for use with our range of Pick Bins up to 300mm deep: AP01, AP11, AP22, AP32, AP33, AP35.

Pick bins sold separately.

Parts Trays

Parts trays are designed to work efficiently with metric steel shelving 900mm wide and 1200mm wide, and can also be used with long span shelving.  We can supply a range of shelving options to suit.

Parts Trays Specifications

Storage Crates

Ideal for storage of bulky items.  These plastic storage tubs are available with or without lids.
Ideal for use with long span shelving (Maxispan or Rivet shelving) our heavy duty storage tubs come in the following sizes.

Storage Crates Specifications

Steel Storage Cabinets

Steel storage cabinet / Swing door cupboard / Stationery cupboard

Quality Australian-made Steel storage cabinets in Adelaide with the following benefits:
Fully welded construction
3-point locking system
2 keys supplied – master keyed system
Shelf capacity – 90kg UDL
5 year warranty

Standard Cabinets

Standard Colours: Silver Grey or Beige
All Standard Cabinets are 900mm wide x 450mm deep.

Staff Lockers

Quality Australian-Made Lockers in Adelaide
Fully welded construction
1, 2, 3, 4 and 8 tier lockers available
Typical lock options: key lock (keys provided) / latch lock (supply your own padlocks)
Other locking options are available – please enquire
Sloping tops, locker stands and bench seating available
Custom sizes and colours available if required
5 year warranty

Our Lockers are perfectly suited to schools, gyms, sporting clubs and swimming centres.

For the best price on Staff lockers Adelaide has to offer, Call us Today.

Standard Locker Dimensions

Standard Colours: White, Silver Grey or Beige

Dangerous Goods Cabinets

A range of dangerous goods cabinets can be supplied, including:

• Flammable goods cabinet
• Corrosive substances cabinet
• Toxic substances cabinet
• Pesticide storage cabinet

Please contact our friendly Adelaide office on 08 8349 6622 with your requirement.

G-Span Long Span Benches

G-Span long span shelving can be used for light duty bench applications.

Our standard long span benches are fitted with 18mm thick particleboard inset shelves.

Standard dimensions

Other heights, depths, lengths and styles may be available on request. See Custom Benches below.

Custom Benches

Please let us know if you have a particular requirement.

We can make long span based benches with:

• Overhead shelves
• Backing boards
• Louvre panel backing for pick bins
• Multiple bay lengths